Calibra C20LET from Belgrade
15 posts
|Page 1 of 1
Calibra C20LET from Belgrade
Hi all,
My name is Nemanja and I'm from Belgrade, Serbia.
Here's my pride and joy
As the title says, it's Opel Calibra Turbo 4x4 MY96.... a 'restyle' version. The entire car is in stock condition except a few minor interior modification by myself such as SMD lights in cabin and luggage compartment, reinforced seats... etc.
These are the photos from last year:
Engine:
Front panel:
Seats
Exterior
... and these are the images from yesterday:
I've played with some 3d stickers (tried to make Cliff ones ), but they don't look so nice, so they'll come off soon
Also, I accidently broke the stock headlights and got them replaced with SONAR angel eyes ones along with the 6000K xenon lights. I already got the spare stock ones (as they look better), but I don't wanna cut them for xenons and stock lights are very s****Y
That's about it
My name is Nemanja and I'm from Belgrade, Serbia.
Here's my pride and joy
As the title says, it's Opel Calibra Turbo 4x4 MY96.... a 'restyle' version. The entire car is in stock condition except a few minor interior modification by myself such as SMD lights in cabin and luggage compartment, reinforced seats... etc.
These are the photos from last year:
Engine:
Front panel:
Seats
Exterior
... and these are the images from yesterday:
I've played with some 3d stickers (tried to make Cliff ones ), but they don't look so nice, so they'll come off soon
Also, I accidently broke the stock headlights and got them replaced with SONAR angel eyes ones along with the 6000K xenon lights. I already got the spare stock ones (as they look better), but I don't wanna cut them for xenons and stock lights are very s****Y
That's about it
-
webboy
Re: Calibra C20LET from Belgrade
Hello mate.
your car looks in very good condition.
Nice to see more examples the same colour as mine
your car looks in very good condition.
Nice to see more examples the same colour as mine
craig
Best Presented Billing 2011
Best Presented Billing 2011
Re: Calibra C20LET from Belgrade
hi and welcome
Re: Calibra C20LET from Belgrade
Thanks guys,
looking forward to spend some quality time here
looking forward to spend some quality time here
-
webboy
Re: Calibra C20LET from Belgrade
Nothings UP its exactly the same havent been on this forum for months and now i se WEBBOYs thread upped ill post some pics of his car, hes got mine inside but a bit smaller
A Collector Never Stops Collecting!1!1
Re: Calibra C20LET from Belgrade
Hi everybody....
I haven't placed any update for quite some time now....
So, here goes:
On the outside, nothing has changed really, it's still stock with exception of 17'' BBS RX, Astra G side repeaters and tinted windows.
But on the inside... quite a different story:
Left to right: boost gauge, Wide Band AFR (whole kit from Innovative Motosport), and oil temp gauge
There's no image of it, but I also fitted an oil temp gauge and sensor for the transfer box.
Now the engine (or lack of it)
Intake manifold
Assembled
Hello KKK
Assembled
F28
and the rest is here...
Transfer box
And assembled (don't have a better one now):
At the moment, I'm waiting for MAHLE forged pistons to rebore the block to 86.5mm so the engine itself is not pimped (yet)
The idea is to clean up the engine bay (will post images when done) and lower the car (I know, I know.. adjustable rear bushes etc) with stock Irmsher springs taken from a DTM Calibra and new Koni adjustable struts.
As a matter of fact, there are a LOT more ideas... but I'll keep you updated.
I haven't placed any update for quite some time now....
So, here goes:
On the outside, nothing has changed really, it's still stock with exception of 17'' BBS RX, Astra G side repeaters and tinted windows.
But on the inside... quite a different story:
Left to right: boost gauge, Wide Band AFR (whole kit from Innovative Motosport), and oil temp gauge
There's no image of it, but I also fitted an oil temp gauge and sensor for the transfer box.
Now the engine (or lack of it)
Intake manifold
Assembled
Hello KKK
Assembled
F28
and the rest is here...
Transfer box
And assembled (don't have a better one now):
At the moment, I'm waiting for MAHLE forged pistons to rebore the block to 86.5mm so the engine itself is not pimped (yet)
The idea is to clean up the engine bay (will post images when done) and lower the car (I know, I know.. adjustable rear bushes etc) with stock Irmsher springs taken from a DTM Calibra and new Koni adjustable struts.
As a matter of fact, there are a LOT more ideas... but I'll keep you updated.
-
webboy
Re: Calibra C20LET from Belgrade
Hi and welcome
Its big... Its BLUE... Its behind you
Magnetic blue SE8
Diamond black turbo 4x4
Magnetic blue SE8
Diamond black turbo 4x4
Re: Calibra C20LET from Belgrade
He is getting engine ready to get humiliated by my stock turbo
shto ti pishu dobrodoshlice ovi novi chlanovi haha
shto ti pishu dobrodoshlice ovi novi chlanovi haha
A Collector Never Stops Collecting!1!1
15 posts
|Page 1 of 1
Who is online
Users browsing this forum: No registered users and 32 guests