Panda's SE3
Re: Panda's SE3
vinny_69 wrote:and a cd playerlets not tell em about the police lights Damo
Vinny's favorite mod


- ClubCalibra.net
- Posts: 2357
- Joined: Sun Jan 11, 2004 1:00 pm
Re: Panda's SE3
what you doing under the car, thought it was just a termostat and the electrics..and the heater panel is out for?
Re: Panda's SE3
we didnt flush the whole system because Bob forgot to bring the rad down so we had to flush the matrix from the pipes under the elephants trunk,but the clips were pointing down towards the road and we couldn't get to them from the top.
the heater was out because i needed to replace the switch as that was duff aswell,so i also routed my mp3 lead into the glovebox
also thats not me or tazz under the car
the heater was out because i needed to replace the switch as that was duff aswell,so i also routed my mp3 lead into the glovebox

also thats not me or tazz under the car

-
vinny_69
Re: Panda's SE3
Whats the nasty red thing?
Mark...........It's Red........It's a V6............It's an SE9!..............and She's bad.
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Mark1@clubcalibra.net
ClubCalibra Best Presented 2006
ClubCalibra Best Presented 2010
ClubCalibra Best Interior 2011
My Garage
Re: Panda's SE3
You must have been exhausted after all the work you did mate, all that camera clicking, your finger must have been aching
.
Look forward to seeing all the hard work in the flesh some day, its looking good.

Look forward to seeing all the hard work in the flesh some day, its looking good.
Nothing succeeds like a budgie with nae teeth
Up the Hibs!!
Now with added Vectra VXR power
Now calibraless
Up the Hibs!!
Now with added Vectra VXR power
Now calibraless
Re: Panda's SE3
Mark1 wrote:Whats the nasty red thing?
its a new member on another forum

Robs-se wrote:You must have been exhausted after all the work you did mate, all that camera clicking, your finger must have been aching.
yeh its not as easy as you may think
-
vinny_69
Re: Panda's SE3
should the 8V not have heat sheilds round the spark plug leads
Re: Panda's SE3
Dont remember mine having shields around them 

Nothing succeeds like a budgie with nae teeth
Up the Hibs!!
Now with added Vectra VXR power
Now calibraless
Up the Hibs!!
Now with added Vectra VXR power
Now calibraless
Re: Panda's SE3
vinny_69 wrote:don't know Frazdid yours?
I am sure it did ...tried not to open the bonnet and look at the engine that often when It was an 8V
Re: Panda's SE3
i try not to do the same Fraz as everything looks far too simple and easy to get to and replace
but it's same for the other end i might add i keep forgetting where the fuel filler cap is as i get well over 400 to the tank now 


-
vinny_69
Re: Panda's SE3
replaced the rad the weekend so it no longer steams up the windscreen
only problem i had was the switch on the new rad didn't work (cheers Ally and whoever else it was i was at a loss) so to replace the switch for the old one it had to come out AGAIN swapped them over filled it all up AGAIN fan kicked in twice Done
drove down to portsmouth yesterday 200 mile round trip and....
......never missed a beat 


drove down to portsmouth yesterday 200 mile round trip and....


-
vinny_69
Re: Panda's SE3
vinny_69 wrote:(cheers Ally and whoever else it was i was at a loss)
that would have been I

Re: Panda's SE3
vinny_69 wrote:replaced the rad the weekend so it no longer steams up the windscreenonly problem i had was the switch on the new rad didn't work (cheers Ally and whoever else it was i was at a loss) so to replace the switch for the old one it had to come out AGAIN swapped them over filled it all up AGAIN fan kicked in twice Done
![]()
drove down to portsmouth yesterday 200 mile round trip and..........never missed a beat
Putting things in and taking them out at least twice is the norm mate.


Glad to read you're not dribbling any longer.

-
opelturbo
Who is online
Users browsing this forum: No registered users and 63 guests