HEADLIGHTS

**RAINMAKER** · by **RAINMAKER** » Sun May 04, 2008 3:46 pm

JUST TOOK THE SE9OUT FOR A SPIN AND TURNED ON LIGHTS, THE FRONT LEFT DIP AINT WORKING. GOT SIDE LIGHTS, GOT MAIN BUT AINT GOT DIP. CHECKED ALL THE NORM BLOWN BULB, FUSE EARTH BUT NOTHING. ANY SUGGESTIONS I NEED HELP.

Fraz · by **Fraz** » Sun May 04, 2008 4:10 pm

replace the bulb

**RAINMAKER** · by **RAINMAKER** » Sun May 04, 2008 4:20 pm

THE BULB IS BRAND NEW AND WORKS IN THE OTHER SIDE FINE. BAFFLED

**thegeth** · by **thegeth** » Sun May 04, 2008 4:29 pm

Have you checked the wires for the headlight unit?

**RAINMAKER** · by **RAINMAKER** » Sun May 04, 2008 4:31 pm

yeah everything seems fine on the wiring, could it be the relay??

Calibra_Mike · by **Calibra_Mike** » Sun May 04, 2008 10:56 pm

recheck the wires mate, I had a headlight that liked to turn itself off... leave the lights of and the open the bonnet and give the wires a bit of a pull/wigle see if that makes anything come to life...

**RAINMAKER** · by **RAINMAKER** » Sun May 04, 2008 11:07 pm

put a volt meter on the thing and no power went to the fuse board and no power at the dip fuse any suggestions

**Phantom** · by **Phantom** » Tue May 06, 2008 12:09 pm

the calibra headlights are inherently bad and some have very little voltage at the lights themselves, have you tried another relay yet?

**RAINMAKER** · by **RAINMAKER** » Tue May 20, 2008 2:29 pm

just to update you all, headlights fixed , theres no relay for the dip and it runs off the switch to the fuse and then to the headlight bulb, just a bad wire connection and a kink that needed to be traced all sorted thanks for advice though.

BazV6er · by **BazV6er** » Tue May 20, 2008 10:21 pm

glad you sorted it mate

**tazz666** · by **tazz666** » Tue May 20, 2008 11:39 pm

now all you have to do is invest in a set of h i d's so you can actually see at night,lol

**cornishtaz** · by **cornishtaz** » Wed May 21, 2008 5:59 pm

Good to hear your lights are still working

**RAINMAKER** · by **RAINMAKER** » Wed May 21, 2008 7:40 pm

yeah mate thanks, big shout to baz for helping and fixing my lights .

**pr0xZen** · by **pr0xZen** » Sat Aug 02, 2008 1:58 am

Seriously. Get HIDs. Solder where HIDs connect to headlight harness - and you'll never need to worry again.

**RAINMAKER** · by **RAINMAKER** » Sat Aug 02, 2008 2:25 am

Seriously i dont need hids as i dont drive at night just needed them working for legal reasons ie the police/law

HEADLIGHTS

HEADLIGHTS

About Us

Join ClubCalibra!