plugs

[scouse1]

any body tell me what these plugs are for they are hangin loose under the offside front by horn, also would anyone know why only one the tones is working on the horn too, checked all the plugs on it and still only one sounds off.




TIA

[RobbieV]

Blue plug is the temp sensor, other i dont know.

[scouse1]

@RobbieV, cheers for reply m8, should the sensor be hanging free or push into the hole above in bulkhead just above were cable tidy is?

[RobbieV]

It should be plugged into a hole at the bottom of the bumper.

[scouse1]

bumper is not original m8, was changed by previous owner, would it be ok to leave as is or tie it up with a cable tie

[RobbieV]

Tie it up will be fine [img]/smile.gif[/img]

[scouse1]

ta m8 [img]/wink.gif[/img]

you wouldn't know why the horn is only sounding on one tone by any chance?

[EY]

<!--QuoteBegin-scouse1+--><div class='quotetop'>(scouse1)</div><div class='quotemain'><!--QuoteEBegin-->ta m8 [img]/wink.gif[/img]

you wouldn't know why the horn is only sounding on one tone by any chance?<!--QuoteEnd--></div><!--QuoteEEnd-->It can only really be the wiring, connections, or that one of the horns is dead. If you've got a multi-meter you can check the voltage at the horn. [img]/smile.gif[/img]

[scouse1]

@EY, not got a MM m8, would the horns on a Sri be the same and would they work, i did change some once on a f**d but they neva worked, would the same thing happen here?

[EY]

Make one with a car bulb a big lump of blutack and two wires lol [img]/biggrin.gif[/img]

I assume all horns are 12v, but i've never checked. [img]/smile.gif[/img]

[scouse1]

might try that tomoz