Fuel Computer Switch

[mattm541]

Ive just got a fuel computer and switch from ebay. The computer is all connected but the loom for the switch is non-existant. How and where do i wire it up to? I have tried searching but not really found much.

Ive got the switch with the white plug on the end is that the right one?

[Craigieloon]

thats correct mate. now you plug this in to the block connector... look down into the console and you should see the pins from the connector. It will be the one closest to you...

I just done mine the other day and was a complete walk in the park thanks to the guide on here.

[mattm541]

Problem is i have no loom for the switch to connect to?

[Craigieloon]

really... nothing there whatsoever....hhhmmm...


in that case you shall be needing this

<a href="http://www.cavweb-forums.co.uk/showthread.php?t=25564" target="_blank">http://www.cavweb-forums.co.uk/showthread.php?t=25564</a>

[Tim2001]

have you found the connection for the fuel computer ??

if so the loom will almost certainly be there are you looking in the right place to connect the switch to.