Complete Overhaul!!!!

Show off your Projects here, the link for the garage is at the top of the page for showcasing your car

Complete Overhaul!!!!

by STEVA » Sat Sep 03, 2011 6:32 pm

Well i thought id better update what im doing with my calibra :D

It all started when i thought id take my engine out to fix a couple of oil leaks as theyve been slowly winding me up and then decided to take the gearbox and transferbox out to clean up!!

So with the running gear out i thought id look behind the foam for a peek and i wish i hadnt lol found some rust just at the bottom of the drivers side just below the brake reservoir had a bit poke as you do and made a hole so thought F***!!!!!! basically all those years of bleeding brakes fluid has ran down and took the paint off and filling up the header tank with water and spilling it has basically sat there and has been slowly eating the car away!!!!

So i would advise all calibra owners to have a look and repair if necessary as you could leave it to late!!!!!

Luckly mine wasnt too bad and ive had it all cut out and replaced by a good friend of mine :D

So with it all repaired ive decided to go mad and weld all the seems up and fill them as im going for the smooth look its going to take a while but sod it if your going to do a job do it right :lol:

so thats how it stands heres a couple of pics of the work so far!!!


Image

Image

Image

Image



Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by Fraz » Sat Sep 03, 2011 6:45 pm

you dont do things by half do you mate lol
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 3621
Joined: Sat Dec 06, 2003 1:00 pm
Location: Rosyth Scotland

Re: Engine bay antics!!!!

by Allys Cally » Sat Sep 03, 2011 8:18 pm

bet your glad you caught it now rather than later mate
BETTER TO HAVE A CALIBRA AND NOT NEED ONE, THAN NEED A CALIBRA AND NOT HAVE ONE!!!

BEST STANDARD BILLING 2009 CO-OWNER
BEST STANDARD BILLING 2011 CO-OWNER
BEST PRESENTED BILLING 2012
BEST ENGINE BAY BILLING 2015
Chairmans Choice - Scottish Car Show 2016
BEST INTERIOR VBOA 2017
BEST IN SHOW VBOA 2018
VBOA CHAIRMAN CUP 2018
User avatar
Gold Club Member
Gold Club Member
 
Posts: 3285
Joined: Tue May 15, 2007 7:30 pm
Location: east ayrshire, scotland

Re: Engine bay antics!!!!

by v6 steve » Sun Sep 11, 2011 8:36 pm

you going to do a wire tuck while your at it ?
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: Engine bay antics!!!!

by STEVA » Mon Sep 12, 2011 12:35 pm

Went up to see my mate yesterday to see what he had getting done and im impressed to say the least he has got 99% of the welding up done he just needs to dress it up and get some filler in to smooth it off for me :D

As ill be doing the finishing off when i get the all clear off the doc as im having loads of bother with my arm at the mo and cant do owt with it :(

Heres a couple of pics


Image


Image



Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by STEVA » Mon Sep 12, 2011 12:59 pm

Fraz wrote:you dont do things by half do you mate lol


No Fraz i must be bloody mad!! lol

Allys Cally wrote:bet your glad you caught it now rather than later mate


Yes ally mate just got there in time lol

v6 steve wrote:you going to do a wire tuck while your at it ?


Dont think ill go that far Steve as that will be a nightmare with the amount of wires there is!!!!!!!




Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by STEVA » Sat Oct 29, 2011 1:06 am

heres a bit of an update!!!!

First coat of filler
Image

Image

Image

This is where im at now filler rubbed down and final coat of stopper
Image

Image

Image

Will take more pics as I progress. I must be bloody mad!!!!


Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by v6 steve » Sat Oct 29, 2011 2:39 pm

Ye you are bloody made but keep it up its looking good :clap:
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: Engine bay antics!!!!

by Fraz » Sat Oct 29, 2011 3:11 pm

must have missed something.....but why all the welding??
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 3621
Joined: Sat Dec 06, 2003 1:00 pm
Location: Rosyth Scotland

Re: Engine bay antics!!!!

by STEVA » Sat Oct 29, 2011 4:04 pm

v6 steve wrote:Ye you are bloody mad but keep it up its looking good :clap:


Cheers steve hopefully wil be going in to get painted next week!!!!! :D


Fraz wrote:must have missed something.....but why all the welding??


Welding the seems up so when i apply the filler it doesnt crack!! :)




Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by Allys Cally » Sat Oct 29, 2011 6:51 pm

Looking good mate :D
BETTER TO HAVE A CALIBRA AND NOT NEED ONE, THAN NEED A CALIBRA AND NOT HAVE ONE!!!

BEST STANDARD BILLING 2009 CO-OWNER
BEST STANDARD BILLING 2011 CO-OWNER
BEST PRESENTED BILLING 2012
BEST ENGINE BAY BILLING 2015
Chairmans Choice - Scottish Car Show 2016
BEST INTERIOR VBOA 2017
BEST IN SHOW VBOA 2018
VBOA CHAIRMAN CUP 2018
User avatar
Gold Club Member
Gold Club Member
 
Posts: 3285
Joined: Tue May 15, 2007 7:30 pm
Location: east ayrshire, scotland

Re: Engine bay antics!!!!

by craigyboy » Sat Oct 29, 2011 7:11 pm

Good job mate,you must have plenty
of patience
craig

Best Presented Billing 2011
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1675
Joined: Sat Mar 13, 2004 4:27 pm
Location: Glasgow

Re: Engine bay antics!!!!

by STEVA » Tue Nov 01, 2011 11:51 pm

Well the cars all prepped and off to the bodyshop for a lick of paint!!!

Heres a couple of pics of the cally ready to go!!!


Image

Image

Image


Cant wait to get it back then the fun begins!!!!!!! :D



Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Re: Engine bay antics!!!!

by rich30mex » Wed Nov 02, 2011 12:12 am

Liking the rims what are they 14s 15s lol

When the fun begins I'm up for a road trip no good with a spanner but I make a meen coffee :D
THE TEA BAG Calibra l,e number 4
THE WELLY rio verdi ecotec on a N reg
UNCLE ALBERT gray 8v on a J reg

Best engine bay 2011
Best engine bay 2014
Best in show 2016
Treasures cup 2016
Best engine bay 2017
Best modern retro total retro 2018

mag features
practical classics
modern classic
performance vauxhall


Have car have cloth will clean need life
User avatar
Events Coordinator
Events Coordinator
 
Posts: 3165
Joined: Sat Jan 03, 2009 11:19 am
Location: a hovel

Re: Engine bay antics!!!!

by STEVA » Wed Nov 02, 2011 3:20 pm

Cheers Rich might take you up on that!!!! :D


Heres another pic i got this morning of it in the booth ;D

Image


Steva
Total Vauxhall Cover Car Autumn 2006
Performance Vauxhall Feature Car 2017
Calibra Turbo 4x4 CLIFF Edition :wink:

My Turbo
My Turbo Rebuild Thread
I will get my Calibra finished one day promise!!!! ITS FINISHED :mrgreen: !!!!!
Best in Show Club Calibra VBOA 2017
Chairman's Cup Winner VBOA 2017
steva@clubcalibra.net
User avatar
Club Secretary
Club Secretary
 
Posts: 636
Joined: Wed Oct 13, 2004 12:00 pm
Location: Under my car polishing the floor pan!

Next

Who is online
Users browsing this forum: No registered users and 11 guests