4 stud '2' 5 stud

[bigdaz1987]

awrite guys i had the chance of gettin some nice wheels cheap only prob is they 5 stud vauxhall what will need changed on mine to make them fit and what donor car will i need to to get parts from at the scrappys

[Mark1]

V6 or turbo Calibra or Cav.

[Allys Cally]

remember you'll also need to change the discs and calipers aswell. unless you get your own discs drilled out for 5 stud hubs.

[bigdaz1987]

i have the v6 brakes on the front the now with the re drilled discs and could vectra stuff be used

[v6 steve]

not sure about vectea stuff but using calibra or cav turbo is a straight swap i would use the whole rear arm and front strut that will save you trying to split hubs off the bearings

[Allys Cally]

the vectra front strut is different so you wouldnt be able to change it straight over, as steve say changing the rear arm and front strut off a v6 or turbo is probably the easiest way of doing it.

[v6 steve]

remember it was only the cav turbo that has independent rear suspension the rest just had beam axels

[Fraz]

the GSI also has IRS

[MarkSE7]

Did the driveshafts have different splines on the hub end as well?