Failed

For all general things Calibra related

Failed

by Robs-se » Sat Jul 24, 2010 8:58 pm

Today i was supposed to be changing my front top mounts but failed miserably thanks the the F'ing tie rod ends. ONce the nut was off the joint just would not split. tried hitting the threaded end up with a 4lb lump hammer, no joy. Cut the sodding thing thing off so once the leg was off we could heat it and hit the thing out. still no joy. The boy is now going to take the legs to work to use the press there, unless anyone has any good ideas on getting these stubs out.

Image

Also will have to replace this rubber damper thing. Do vauxhall still stock these?

Image

Bloody wish i hadn't started now :cry: Still have the wishbone, new tie rods and cv boots to do. I hate my car right now, its nasty and not playing the game, still at least the drop links didn't snap :D
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by v6 steve » Sat Jul 24, 2010 9:03 pm

have you tryed heating them now youv cut it off, the last time we did the struts we took the arms off at the rack to save us f*****g the ends, to be fare they are only £7/8 each so best repaced anyway
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: Failed

by Robs-se » Sat Jul 24, 2010 9:06 pm

Yep heated with them lying on the deck and nothing. Will be doing that next time me thinks. Live and learn and i'm getting too old for this sh!t. Lucky the boy is a HGV mechanic, he can do it all now lol
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by vinny_69 » Tue Jul 27, 2010 7:24 pm

why dont you call me??????????

i have two rubbers in the shed i think as for getting them out grind the other side out and place a nut on the other side,get your splitter out and do it up then hit it bloody hard.

if you do a good job it should fire out like a bullit and put a hole in your fence :oops:
vinny_69
 

Re: Failed

by Callyman » Tue Jul 27, 2010 7:30 pm

vinny_69 wrote:if you do a good job it should fire out like a bullit and put a hole in your fence :oops:


That sounds like experiance Vinny
Details on how to join the club---Click me
User avatar
Club Memberships
Club Memberships
 
Posts: 4011
Joined: Wed Sep 22, 2004 6:22 pm
Location: Andover, Hampshire

Re: Failed

by Robs-se » Tue Jul 27, 2010 7:31 pm

They had to go under the oxcycetaline torch until they glowed orange and even then they were hard to get out. Didn't call you as you were moving and the rubber stop things are order from Germany. Motor is still sitting looking sorry for itself in bits on the drive :cry:
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by vinny_69 » Tue Jul 27, 2010 7:36 pm

you could still have called me :cry: i could have done with a rest anyway

and yes Andy i shat myself as it missed the greenhouse by about 4 inches
vinny_69
 

Re: Failed

by Robs-se » Tue Jul 27, 2010 7:40 pm

Can i have one of your rubbers please, i've still to rebuild the legs and refit everything but the bl**dy nightshift is hindering. Cash and a cuppa waiting :D
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by vinny_69 » Tue Jul 27, 2010 7:44 pm

if i get the chance i will pop them round tomorrow for ya mate :D do you need anything else?
vinny_69
 

Re: Failed

by Robs-se » Tue Jul 27, 2010 7:49 pm

vinny_69 wrote:if i get the chance i will pop them round tomorrow for ya mate :D do you need anything else?


Cheers mate, i'm around all afternoon, my birthday, out early evening.

As for anything else this is a family site and Kylie is spoken for :lol:
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by vinny_69 » Tue Jul 27, 2010 7:51 pm

i would rather have Danni myself :lol: ok if your not in i will chuck em over the fence or something
vinny_69
 

Re: Failed

by Robs-se » Tue Jul 27, 2010 7:52 pm

Or leave them under the car
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Failed

by vinny_69 » Tue Jul 27, 2010 7:53 pm

you cant do that to Danni :lol:
vinny_69
 

Re: Failed

by Robs-se » Tue Jul 27, 2010 7:55 pm

Or both even, going to have to stop now i'm getting those thoughts. Not good at my age :lol:
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton


Who is online
Users browsing this forum: No registered users and 45 guests