Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
Re: LPG install :) + hood lifters +boot install gratis.bonus
the front end looks good, almost like the r32 skyline..!
but looking at those roads, i would buy a 4x4!
with such a big ported sub, have you done much soundproofing? if not its going to be a very loud rattle!!
but looking at those roads, i would buy a 4x4!
with such a big ported sub, have you done much soundproofing? if not its going to be a very loud rattle!!
-
ja1983
Re: LPG install :) + hood lifters +boot install gratis.bonus
A Collector Never Stops Collecting!1!1
Re: LPG install :) + hood lifters +boot install gratis.bonus
FINALLYYY BEHOOOLLDDD ive got myself a car pc...Its my old craptop which i didnt use for few years coz 3~4 years ago (ive made laptop shell instead of glowbox) and tried to extend flatcable for display (kido) and i broke flat so my laptop is still without lcd coz i cant find flat cable (later on i froze bios flash and it was sitting under my desk since i never actually needed a laptop unless it isnt in a car but in parts tried everthing and fixed bios few months ago) nvm ive got my touchscreen now and im using it in car...I use centrafuse 2.0 will add pics when i finish everything in a few days if i catch free time...Its already fitted laptop is on shell instead of glowbox and touch is on usual spot instead of middle vents...Dont mind blurry pics and 101 dalmatians chair i was in a hurry didnt choose right mode on camera...
Laptop is Acer Travelmate 632LC 1.6 intel ddr1 768mb GF2 GO 60GB +320GB external ...its running winXP like hell...centrafuse is fast, booting is not that bad but i mostly hibernate when i leave the car...Id like to change it with miniITX pc but need more money so it will stay like this for now...LCD is Thermaltake 7" LCD touchscreen FOR PC (its made for use in some thermaltake PC towers 1din bay) since in serbia we dont import touchscreens this PC version was only choice but ive seen ppl using them in car even tho it doesnt have great brightness for day use ...1st page in manual says "ONLY FOR PC USED. NOT FOR CAR USE" but it runs on 9-14.4V and there are no problems...
My favorite music is in lossless format i rarely listen to mp3's would love to hear PC with one of creative's sound cards on my sound system but for now Pioneers DSP is fine
U can see my tweeters in carbon my old DVD was in carbon surrounding too...
Laptop is Acer Travelmate 632LC 1.6 intel ddr1 768mb GF2 GO 60GB +320GB external ...its running winXP like hell...centrafuse is fast, booting is not that bad but i mostly hibernate when i leave the car...Id like to change it with miniITX pc but need more money so it will stay like this for now...LCD is Thermaltake 7" LCD touchscreen FOR PC (its made for use in some thermaltake PC towers 1din bay) since in serbia we dont import touchscreens this PC version was only choice but ive seen ppl using them in car even tho it doesnt have great brightness for day use ...1st page in manual says "ONLY FOR PC USED. NOT FOR CAR USE" but it runs on 9-14.4V and there are no problems...
My favorite music is in lossless format i rarely listen to mp3's would love to hear PC with one of creative's sound cards on my sound system but for now Pioneers DSP is fine
U can see my tweeters in carbon my old DVD was in carbon surrounding too...
A Collector Never Stops Collecting!1!1
Re: LPG install :) + hood lifters +boot install gratis.bonus
U can check carPC install here
viewtopic.php?f=57&t=41963&p=430280#p430280
viewtopic.php?f=57&t=41963&p=430280#p430280
A Collector Never Stops Collecting!1!1
Re: LPG install :) + hood lifters +boot install gratis.bonus
i love that front end looks lush, nt sure bout the dash thou but each to their own.
-
simon_709
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
I finally removed leather from my dashboard and decided to do it my way
a
I disassembled apple dock and fill it in the dashboard with fiberglass now i can put all iphones without removing cases
in the end...
I was doing it with a friend, we wrapped whole dash with one piece of carbon vinyl, ill finish lcd bezel these days...
a
I disassembled apple dock and fill it in the dashboard with fiberglass now i can put all iphones without removing cases
in the end...
I was doing it with a friend, we wrapped whole dash with one piece of carbon vinyl, ill finish lcd bezel these days...
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
Hello of alot of work gone in to that
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
In Serbia now we get NEW LICENSE PLATES so i almost got WC (which would be nicer then those Serbian fonts with "W" which we dont have)
So i decided to remove front bumper and change grill since it got worn, and i did polish my headlights... Since one headlight was cracked from few years ago, i tore it apart to polish it from the inside and decided to finally use those FOGlights for something useful...kinda daylight...i put H1 68 SMD bulbs which i needed to open foglight to fit from the inside... And i did fiberglass my broken headlamp and now its not foggy inside when its raining means i did a good job
Some pics when i brought it home broken like 4.5 years ago, i did glue it with super bond and then fiberglass where parts were missing...
I was very happy coz i didnt have to buy new ones (even tho it got foggy when it rains until today
New pics including my WC number plate (it took me few hours for four days to build up the headlight, polish and put it back)
So i decided to remove front bumper and change grill since it got worn, and i did polish my headlights... Since one headlight was cracked from few years ago, i tore it apart to polish it from the inside and decided to finally use those FOGlights for something useful...kinda daylight...i put H1 68 SMD bulbs which i needed to open foglight to fit from the inside... And i did fiberglass my broken headlamp and now its not foggy inside when its raining means i did a good job
Some pics when i brought it home broken like 4.5 years ago, i did glue it with super bond and then fiberglass where parts were missing...
I was very happy coz i didnt have to buy new ones (even tho it got foggy when it rains until today
New pics including my WC number plate (it took me few hours for four days to build up the headlight, polish and put it back)
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
Its been a while, ive been up to installing some AC on my 8v its been like 2 months since i started... Its almost done, i did put alubutyl and i will soon try AC and start assembling it back with new trunk setup, i also got black leather interior im thinking of a car wrap, painting my 18" in black prolly
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
i havent seen this thread before but there is a hell of alot of work gone into this build! i love the built in pc
- Club Member
- Posts: 684
- Joined: Mon Apr 05, 2010 10:21 pm
- Location: carlisle
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
Yup, hope this week AC will be filled and running so i can put dashboard back in and finish the trunk
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
A Collector Never Stops Collecting!1!1
Re: Uber Calibra 2.0 1991 8v 115HP Update on 2nd page
A Collector Never Stops Collecting!1!1
Who is online
Users browsing this forum: No registered users and 43 guests