Track rod ends and wishbones - pairs?

Any issues relating to suspension, steering and brakes.

Track rod ends and wishbones - pairs?

by MadOnVaux! » Mon May 14, 2012 4:06 pm

I had my MOT in april and i always tell the garage if it needs anything just to do it....and it needed an o/s wishbone and n/s track-rod-end, so they were fitted.

Thing is, now it feels abit unstable at motorway etc speed, it feels like i keep having to correct the steering and it doesnt feel solid......could this be due to them not fitting a pair of the wishbones and trackrods or wouldnt that matter.

also when i am turning in somewhere left on full lock the tyre is catching on something now, where as it wasnt before.

any advice and/or suggestions?

Thanks In advance :)
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by Allys Cally » Mon May 14, 2012 4:17 pm

anytime theres something needed changed on the steering i've always changed both sides at once. it could be that now the opposite sides are now wearing causing the problems with the steering :think:
BETTER TO HAVE A CALIBRA AND NOT NEED ONE, THAN NEED A CALIBRA AND NOT HAVE ONE!!!

BEST STANDARD BILLING 2009 CO-OWNER
BEST STANDARD BILLING 2011 CO-OWNER
BEST PRESENTED BILLING 2012
BEST ENGINE BAY BILLING 2015
Chairmans Choice - Scottish Car Show 2016
BEST INTERIOR VBOA 2017
BEST IN SHOW VBOA 2018
VBOA CHAIRMAN CUP 2018
User avatar
Gold Club Member
Gold Club Member
 
Posts: 3285
Joined: Tue May 15, 2007 7:30 pm
Location: east ayrshire, scotland

Re: Track rod ends and wishbones - pairs?

by Fraz » Mon May 14, 2012 5:15 pm

did they also do the tracking??
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 3621
Joined: Sat Dec 06, 2003 1:00 pm
Location: Rosyth Scotland

Re: Track rod ends and wishbones - pairs?

by v6 steve » Mon May 14, 2012 7:59 pm

as above i would always do both sides at the same time and if your track rod end has been done your tracking will need adjusted
steve
Chairman

The Drain

LE 4x4 turbo

SE2 4x4 turbo RIP
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 7178
Joined: Wed Jan 03, 2007 6:58 pm
Location: lanarkshire

Re: Track rod ends and wishbones - pairs?

by Calibra_Mike » Mon May 14, 2012 8:50 pm

I would have said both should be done at the same time really, chances are if one side is worn it wont be long before the other will be too...
VXT RACING DEVELOPMENTS - Designed by Vauxhall... Modified by Me...
The VXT Calibra, back on the road Oct'13... the Adventure Continues...
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 823
Joined: Sun Jun 17, 2007 5:06 pm
Location: Horndean/Portsmouth

Re: Track rod ends and wishbones - pairs?

by MadOnVaux! » Mon May 14, 2012 9:39 pm

cheers guys ....i was kinda thinking that both would need doing, i think i'll get it booked in for the others to be replaced.
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by Allys Cally » Mon May 14, 2012 9:42 pm

MadOnVaux! wrote:cheers guys ....i was kinda thinking that both would need doing, i think i'll get it booked in for the others to be replaced.

honestly it wouldn't be a bad idea, and obviously as the guys have said above it will need re-tracked as well after you get the work done
BETTER TO HAVE A CALIBRA AND NOT NEED ONE, THAN NEED A CALIBRA AND NOT HAVE ONE!!!

BEST STANDARD BILLING 2009 CO-OWNER
BEST STANDARD BILLING 2011 CO-OWNER
BEST PRESENTED BILLING 2012
BEST ENGINE BAY BILLING 2015
Chairmans Choice - Scottish Car Show 2016
BEST INTERIOR VBOA 2017
BEST IN SHOW VBOA 2018
VBOA CHAIRMAN CUP 2018
User avatar
Gold Club Member
Gold Club Member
 
Posts: 3285
Joined: Tue May 15, 2007 7:30 pm
Location: east ayrshire, scotland

Re: Track rod ends and wishbones - pairs?

by Robs-se » Tue May 15, 2012 7:51 am

Might be an idea to replace the whole track rod as the inner part may be seized/rusted and they would have to rebuild it to re track. Saves the garage saying they've done it charge you a fortune and it hasnt realy been done like some main tyre shop did to me after i bought the SE2 :evil: Easy enough to do yourself
Nothing succeeds like a budgie with nae teeth

Up the Hibs!!

Now with added Vectra VXR power

Now calibraless
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 1320
Joined: Thu Apr 08, 2004 8:55 pm
Location: Luton

Re: Track rod ends and wishbones - pairs?

by MadOnVaux! » Tue May 15, 2012 4:56 pm

I kinda wish they had phoned me really, as i'd have said do both sides...my fault in a way lol
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by EddeyDancer » Mon May 21, 2012 1:01 pm

MadOnVaux! wrote:I always tell the Garage that if it needs anything, just to do it...

Any advice and/or suggestions?


Big Mistake!!! :naughty:

Never let them do as they please, unless You know them that well...

Always ask them to place the 'Old Parts' in the boot for You...

That's what I did when I replaced the Wishbones, Sway Bar Links and Tie Rod Ends...

Once that's all done, a Wheel Balance and Wheel Alignment is the Final Stage!!!
The Ghost - V6 Opel
'Calibra with Style'
ClubCalibra.net
ClubCalibra.net
 
Posts: 1103
Joined: Sun Oct 10, 2010 6:11 pm
Location: Sydney - Australia

Re: Track rod ends and wishbones - pairs?

by MadOnVaux! » Mon May 21, 2012 3:44 pm

EddeyDancer wrote:
MadOnVaux! wrote:I always tell the Garage that if it needs anything, just to do it...

Any advice and/or suggestions?


Big Mistake!!! :naughty:

Never let them do as they please, unless You know them that well...

Always ask them to place the 'Old Parts' in the boot for You...

That's what I did when I replaced the Wishbones, Sway Bar Links and Tie Rod Ends...

Once that's all done, a Wheel Balance and Wheel Alignment is the Final Stage!!!



Well i do know them well and trust them...they wouldnt replace parts unnecessarily.

Plus i found out my wheel spacers were warped and causing my wheels to rotate in a very strange way, so hence when they tracked it, it will have given a false reading....and as i dont need the spacers any more due to having bigger front discs and as such the wheels dont catch on the calipers, i am taking the spacers off.

This Calibra has been an utter ball ache ever since i bought it, but i still love it lol....even though i STILL have the rear knocking!!!! AAARGH!
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by MadOnVaux! » Tue May 29, 2012 8:32 pm

The car is back after having the n/s wishbone and o/s track-rod-end done.....and well, the steering feels alot better, but the wheel isnt 100% straight, and it feels lighter/easier to turn right, than it does to turn left.

Any ideas now?....I cant see it being anything the garage has done as they are a good garage and this is a simple job....they have re-set the tracking, i'm wondering if it needs a proper alignment somewhere?
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by Fraz » Wed May 30, 2012 11:04 am

May have only set the alignment by only adjusting the one side, that may be why its easier on turning one way

Sent from my HTC Wildfire S A510e using Tapatalk 2
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 3621
Joined: Sat Dec 06, 2003 1:00 pm
Location: Rosyth Scotland

Re: Track rod ends and wishbones - pairs?

by MadOnVaux! » Tue Jun 05, 2012 3:13 pm

After driving it around for abit, i think both sides are the same, maybe just because the wheel is off abit to the right, it feels easier to turn right?

I have a bloody intermittant clunky knocking coming from the n/s/f now!! and it isnt the ARB link as thats the first thing i checked.

god it just seems like one thing after another at the moment :(
User avatar
ClubCalibra.net
ClubCalibra.net
 
Posts: 847
Joined: Fri Mar 12, 2004 1:00 pm
Location: South Cumbria

Re: Track rod ends and wishbones - pairs?

by EddeyDancer » Tue Jun 12, 2012 5:05 pm

MadOnVaux! wrote: I have a bloody intermittant clunky knocking coming from the n/s/f now!!


Does this happen only on full lock of the steering wheel?

If so, does it happen when you turn to the left or to the right, or both sides??
The Ghost - V6 Opel
'Calibra with Style'
ClubCalibra.net
ClubCalibra.net
 
Posts: 1103
Joined: Sun Oct 10, 2010 6:11 pm
Location: Sydney - Australia

Next

Who is online
Users browsing this forum: Google [Bot] and 29 guests